Tynee Mini 3 belt version with 90mm wheels and 393Wh battery

• 13S 54.6V power supply system.
  13S2P Molicel 393Wh battery.
  Hobbywing V7.0 FOC ESC with application.
  Full belt covers (only for 105 wheels).
  Maximum speed 52 km/h.
  Range up to 32 km.
  Built-in brake light.
  Front protector and brake pad.
  Griptape 3 mm thick.

On Wheels 90 mm / 393Wh Battery
Two 850W belt motors

Powerful torque, excellent dynamic balance

With two 850W belt motors and a 54.6V controller driving them, the Mini 3’s power system is huge. It is characterized by very high precision and excellent dynamic balance.

Tynee Mini 3 PRO – high performance in a compact form

Molicel P42A 393Wh battery

Discharge current 90A. More charging cycles.

The battery is the most important and most expensive element of an electric skateboard, which is why we chose the best cells available – Molicel P42A. They can discharge with a current of 90A. While many board brands use cheap, unknown cells, Tynee insists on using high-quality Molicel cells which will provide better performance, longer life and more charge cycles.

13S high voltage power system (54.6V)

More power, more efficiency, no voltage drops.

Tynee Mini 3 uses a 13S (54.6V) high voltage power system. Compared to other boards that have 10V (and 42V), the 13S battery we use provides more torque, faster acceleration, higher speed, higher efficiency, lower voltage drop and less heat generated. As a result, the battery in our Mini 3 delivers incredible performance and exceptional durability.

Full protection

Factory installed front protector and brake pad.

All Tynee mini 3s come factory equipped with a front protector and brake pad. Their design is simple and beautiful, and they are made of high-quality nylon and fiberglass. They protect the board and increase its durability.

Built-in brake light

With 3 modes, controlled by remote control.

Equipped with a built-in brake light, our Mini 3 lets those behind you know when you’re slowing down. You can also choose to keep it always on during night rides or flashing during group rides. You can control these settings via the remote control, and since it’s wired to the board’s battery, you don’t have to charge it separately. To switch between different modes, double-click the power button on the remote control. There are 3 flashing modes:

1. The light comes on when braking

2. Flashing

3. Always on

2 extra strips.

1 user manual (PDF).